 2017 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2

MODEL

DRBB

2-way, direct-acting, directional valve with internal drain to port 3 - normally

closed

SERIES 1 / CAPACITY: 28 L/min. / CAVITY: T-11A

NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

Normally closed, direct-acting, 2-way directional cartridges are switching devices typically used in moderate flow

circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic

cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.

TECHNICAL DATA

Cavity T-11A

Series 1

Capacity 28 L/min.

Factory Pressure Settings Established at 15 L/min.

Maximum Operating Pressure 350 bar

Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.

Adjustment - No. of CW Turns from Min. to Max. Setting 5

Valve Hex Size 22,2 mm

Valve Installation Torque 41 - 47 Nm

Adjustment Screw Internal Hex Size 4 mm

Locknut Hex Size 15 mm

Locknut Torque 9 - 10 Nm

Seal kit - Cartridge Buna: 990011007

Seal kit - Cartridge Polyurethane: 990011002

Seal kit - Cartridge Viton: 990011006

Model Weight 0.20 kg.

snhy.com/

DRBB

For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.

NOTES

 2017 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 2

(L)CONTROL

L Standard Screw Adjustment

C Tamper Resistant - Factory Set

K Handknob

(A)ADJUSTMENT RANGE

A 500 - 3000 psi (35 - 210 bar), 1000 psi

(70 bar) Standard Setting

B 50 - 1500 psi (3,5 - 105 bar), 200 psi

(14 bar) Standard Setting

D 25 - 800 psi (1,7 - 55 bar), 200 psi (14

bar) Standard Setting

E 25 - 400 psi (1,7 - 28 bar), 200 psi (14

bar) Standard Setting

S 25 - 200 psi (1,7 - 14 bar), 100 psi (7

bar) Standard Setting

W 750 - 4500 psi (50 - 315 bar), 1000 psi

(70 bar) Standard Setting

(N)SEAL MATERIAL

N Buna-N

V Viton

MATERIAL/COATING

Standard Material/Coating

/AP Stainless Steel, Passivated

/LH Mild Steel, Zinc-Nickel

TECHNICAL FEATURES

Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration,

the 4 port version of this valve may be a solution.

Because of their direct-acting design, these cartridges feature low internal leakage and low pilot flow consumption.

Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.

This valve is not bistable; it is capable of modulating between the two positions shown.

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.

PERFORMANCE CURVES

Model Code Example: DRBBLANCONFIGURATION OPTIONS